Victron Orion Tr-Smart charger
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles such as horseboxes or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
Any Bluetooth enabled smartphone, tablet or another device can be used to monitor, to change settings and to update the charger when new software features become available from Victron Energy.
For lead-acid batteries, it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged.
For lithium batteries, absorption time is fixed for a default of 2 hours. Alternatively, a fixed output voltage can be chosen. An example schematic of the Vitron Orion Tr-Smart charger can be found here. A manual is also available to download.
Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power and are short circuit proof.
For more information or prices please contact us on 01663 734800.