Introducing a brand new easy to read display which keeps us ahead of the opposition.
This is designed to fit into the water piping between the tank and the pump. It will measure the depth of fluid above the sensor so it should be approximately at the same level as the bottom of the tank although the orientation is unimportant. It can also be fitted in balance pipes or can be fitted to a straight coupler in place of the āTā as an end stop to a pipe stub, 15mm or 22mm are options. These units are normally calibrated by the customer after the tank has been filled but can be pre-calibrated to special order. We would recommend that an isolation valve is fitted between the tank and the unit.
If fitted in line with the pump the gauge will read empty while the pump is running.
The heart of our new range of Tank Level Gauges is a stainless steel industrial grade pressure transducer ā pictured left. The stainless steel diaphragm ensures that no fluids come into contact with the sensing element ensuring maximum reliability. This transducer is packaged in various forms of housing making sure that there is a system to suit your application. The result of the measurement of the fluid level is, first of all, averaged over a period of time, and then displayed on our new illuminated graphics gauge.
The gauge features a twenty segment display with backlighting to ensure clarity even in dark corners, plus a warning triangle that flashes as tank contents approach critical levels.
Finally, a purpose-designed molded case completes the package.
This 15mm unit is available with our current range of gauges designed for the inland waterways market and our newly launched Offshore range recommended for all seagoing craft.
This option is suitable for freshwater or wastewater, but NOT fuel.