Fuel Filter complete with 15-micron paper element.
The body also has a drain screw for water.
The W-30 is used within a wide range of industries and is ideal for use on narrowboats. All metal bowl units meet and exceed the requirements of ISO 10088 Annex B.
Offering a flow rate of up to 1.6 lit/min, this cost-effective fuel filter is ideal for marine, heating, industrial and transport applications.
Features
Flow rates up to 1.6 lit/min
LM6 grade aluminium filter heads with reversible stainless-steel bracket & bolts
Powder-coated aluminium filter heads for corrosion prevention & long service life
ISO10088 metal bowl
Technical specifications
Maximum operating pressure 2bar
Max operating temp (metal bowl) 90 deg C
Compatible with diesel and heavy oil
Installation
Carefully follow the flow direction shown by an arrow on the filter. The filter can be installed in any position although it is recommended to fit it vertically with the bowl pointing downwards in order to facilitate the separation of the water traces and the deposit of the filtered impurities. Cleaning the filter is carried out by unscrewing the central bolt and then unscrewing the bowl. Carefully wash the filtering element with clean diesel, gas-oil or gasoline. Remount the unit and check that the seals are integral and well placed. Paper elements should be replaced as they cannot be reused. Water can be drained by opening the bleed screw on the lid and then the water drain at the bottom of the bowl